26 found, showing page 1 of 2
1QT BAR & CHAIN OIL
Formulated with highly refined base stocks and select additives to assure excellent performance. Designed with high load-carrying capacity to protect against high pressures generated in the bar and chain during operation. A special tackifier is added to the oil, which promotes good adhesion to moving parts and minimizes oil throw off. Designed especially for lubrication of bar and chains on chain saws and open and enclosed chains on motorcycles, snowmobiles and lawn and garden equipment.
View Details
Call for Price
50-LB OIL ABSORBENT
For quick clean up of water oil and grease. Made from montmorillonite a naturally occuring mineral with superior absorbtion. Packaged in leak resistant moisture proof poly bag.
View Details
Call for Price
HAND-E GRIP FUNNEL
Multi-Purpose Funnel Features A Large Opening, Mesh Screen And Easy Grip Handle On The Outside For Less Mess. The Self Adjusting Spout Fits Multiple Openings Securely. Made Of Tough, High Density Resin. Unit Dimensions: 11" X 8.75" X 12.5".
- Resin
- The Multi-Purpose Hand-E Grip Funnel Features A Large Opening
- Mesh Screen
- Easy Grip Handle On The Outside For Less Mess Use
- The Self Adjusting Spout Fits Multiple Openings Securely
View Details
Call for Price
Clear Thread Cutting Oil, 1/2 Pint
HARVEY lubricants are a great quality cutting oil formulated to extend the life of hand tools and pipe threading machines.
- Boiling Point: 680 deg F
- Compositions: Highly Refined Petroleum Oils
- Evaporation Rate: 1
- Flammability Rating: 1
- Flash Point: 370 deg F
- Net Content: 1/2 pt
- Odor/ Scent: Sulfur
- Specific Gravity: 0.9
- Vapor Pressure: 0.01 mmHg
- Viscosity: 27.5 to 33.5 sq-mm/s
- V O C Content: 20 g/L
- Thread cutting oil is specially formulated to give sharp, clean threads and to extend die life
- A great quality cutting oil that can be used on most metals
View Details
Call for Price
11838 OIL DRAIN PAN 15QT
For Easier, Cleaner Oil Changes. Large Opening With Spout For Easier Pouring And Dispensing. Molded Handle For Convenient Carrying. Also For Draining Antifreeze Or Transmission Fluid. Resistant To Chemicals And Solvents; Will Not Rust, Dent, Or Corrode. Holds Up To 3 Oil Changes. Black With Black Closure And Spout.
- Polyethylene
- Cap Qt : 15
- Large Capacity Holds Multiple Oil Change
- Handle And Spout For Easy Carrying And Pouring Control
- Built In Filter Drain Stand
View Details
Call for Price
GEAR OIL 80W90 QT
Manufactured From High Quality Base Oils And Additives To Provide Excellent Load Carrying Ability, Extreme Pressure (EP) Properties, Wear Resistance, Oxidation Stability And Protection Against Rust And Corrosion. They Are Recommended For Make-Up And Complete Refill Of All Passenger And Light Truck Conventional Differentials, Transmissions And Steering Gears, And For Top-Off Limited Slip Differentials. Recommended For Use Wherever And API GL-5 Oil Is Required.
- Premium GL-5
- 80W-90
- Size : Quart
- Excellent Wear Protection
- Shear Resistant
- Oxidation And Thermal Stability For Long Life
- Excellent Rust And Corrosion Protection
View Details
Call for Price
Sweep-EZ Floor Sweeping Compound, Wax Base - 50 Lbs.
Compound is recommended for fine finished floors, (i.e. resilient, terrazzo, asphalt, rubber, cork, marble and composition). It is safe to use on waxed floors. Compound does not contain oil or sand-grit so it will not scratch or disintegrate floor surfaces. Color of sweeping compound is green.
- Applicable Materials: Asphalt, Marble, Rubber, Terrazzo
- Base Type: Wax
- Color: Gold
- Package Size: 50 lb
- Type: Wax-Based
View Details
Call for Price
ENGINE OIL STOP LEAK
Compatible With Petroleum, Semi-Synthetic And Full Synthetic Motor Oils. Renews Worn Seals Without Damage Or Eventual Corrosion. Reduces Engine Noise And Oil Consumption, While Raising Oil Pressure. Contains No Harmful Solvents.
- Stop Leak
- Size : Quart
- Compatible With Petroleum, Semi-Synthetic And Full Synthetic Motor Oils
- Renews Worn Seals With No Risk Of Damage Or Eventual Corrosion
- Reduces Engine Noise And Oil Consumption, While Raising Oil Pressure
- Contains No Harmful Solvents
- Lucas Engine Oil Stop Leak Is An All New Formulation Of Lucas Additives And Very Specific Base Stocks Designed To Stop Seal Leaks In Engines
View Details
Call for Price
3-Piece Funnel Set
Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with substances such as oil, radiator fluid or fuel additives. Includes one each: gray 1/2 pt, charcoal 1 pt and black 2 qt.
- Includes: (1) 1 pt Charcoal (1) 0.5 pt Gray (1) 2 qt Black Funnels
- Material: High-Density Polyethylene
- Suitable for: Multiple Substances Such as Oil Radiator Fluid or Fuel Additives
View Details
Call for Price
Sanded Oil Base Sweeping Compound, 50 Lbs
Cotto-Waxo sanded oil base sweeping compound. Lightly oiled compound: sawdust based and grit. Captures dust and dirt when sweeping. Designed for unfinished wood and concrete floors. Effective for removing "clay type" dirt and dust. Manufactured with higher volume per pound. Suppresses airborne dust during sweeping.
View Details
Call for Price
66079 STP OIL TREATMENT
Provides A Thick Cushion Between Moving Engine Parts To Fight Friction And Protect Against Engine Wear. Use Every Oil Change. Treats 4-5 Litres Of
Oil.
- Performance
- Size : 15 Oz
View Details
Call for Price
707 12-OZ FLEX SPOUT OILER
For Industrial Applications. Steel With Double Seamed Or Drawn Steel Bases. Plated Top Cap And Handle Assembly With Removable 8" Spout. Die-Cast High-Pressure Pump With Precision Ground Piston To Deliver A Drop Or Stream Of Oil. Stays Primed For Instant Use. Powder-Coated Copper Finish With Zinc-Plated Top Cap.
- Steel - Industrial
- Flexible Spout
- Cap Oz : 12
- Steel With Double Seamed Or Drawn Steel Bases
- Plated Top Cap And Handle Assembly With Removable 8 In Spout
- Die-Cast High-Pressure Pump With Precision Ground Piston To Deliver A Drop Or Stream Of Oil
- Stays Primed For Instant Use
- Powder-Coated Copper Finish With Zinc-Plated Top Cap
View Details
Call for Price
